Remote Sensing B, unit 4: Elevation, contours and slope
Goal: Find the elevation of a point from the contour lines, and calculate the slope between two points.
Parts of the rules: 3.b.i.(2), 3.b.i.(3)
Interpretation (3.b): 65-75% of the points
The plan: the homework, the examples, a quiz of six questions, and the practice.
From the homework
- How do the contour lines show which way this stream flows?
- Which side of the hill is steeper?
- How do you know that the land inside the closed line with ticks is low?
If you did not read the homework, read the homework deck of unit 4 after the session.
Find the contour interval
- Find two index contours next to each other, and subtract their elevations.
- Count the spaces between them: the lines between, plus one.
- Divide. Example: 100 feet with four lines between is 100 ÷ 5 = 20 feet.
(1,200 − 1,100) ÷ (4 + 1) = 20 feet
Tap a line between to see its elevation.
(1,500 − 1,000) ÷ (2 + 1) = about 166.67 feet
Tap a line between to see its elevation.
A strip of a map with two index contours, 1,100 feet and 1,200 feet, and 4 contour lines between them.
A circle for the contour interval
Cover the part that you want.
rise (difference in elevation) = interval × spaces
interval (contour interval) = rise ÷ spaces
spaces (number of spaces between the lines) = rise ÷ interval
A point between two lines
- A point between the 1,200 and 1,220 foot lines is between 1,200 and 1,220 feet.
- Halfway between the lines, estimate 1,210 feet.
- A hilltop is less than one interval above its highest closed line.
- A spot elevation gives the exact value.
Higher than 1,100 feet and lower than 1,120 feet. About 1,110 feet.
Higher than 1,380 feet and lower than 1,400 feet, inside the highest closed line.
The ground at the pin: 1,392.11 feet.
A map of Pixel Peak from above, with a contour line every 20 feet. Drag the pin, or tap the map, to move it. The pin snaps to the spot elevation on the top and to the benchmark, BM, when it is close. Press an arrow key to move the pin 10 m, or 100 m with Shift.
Slope from a map
- Point A is at 1,240 feet. Point B is at 1,640 feet. On a map at 1:24,000, they are 2 inches apart.
- The run: 2 inches is 4,000 feet on the ground.
- The rise: 1,640 − 1,240 = 400 feet.
- The slope: 400 ÷ 4,000 = 0.1, or 1 in 10.
- As a gradient: a mile is 5,280 feet, so 0.1 × 5,280 = 528 feet per mile.
Run: 2 inches is 4,000 feet on the ground
Rise: 200 feet
Slope: 200 ÷ 4,000 = 0.05, or 1 in 20
Gradient: 264 feet per mile
Run: 2.75 inches is 5,500 feet on the ground
Rise: 6,000 feet
Slope: 40 ÷ 5,500 = 0.00727, or about 1 in 138
Gradient: about 5,262 feet per mile
A side view of a straight path from point A, low, to point B, high. The run is along the bottom, the rise is up the side, and the path is the slanted side. The drawing has its true shape, with no stretch. A strip of a map at 1:24,000 under the triangle shows the run on the map.
A circle for the slope
Cover the part that you want.
rise (change in elevation) = slope × run
slope (how steep it is) = rise ÷ run
run (distance on the ground) = rise ÷ slope
Draw a profile
- Lay a strip of paper along the line on the map. Mark each place where a contour line crosses it, with its elevation.
- Move the marks to a graph: distance along the line across, elevation up.
- Join the points with a smooth line.
Step 3 of 3: a smooth line through the points.
Step 1 of 3: a mark on the strip at each contour line.
Steepest: between the 1,220 foot line and the 1,320 foot line.
Steepest: between the 1,380 foot line and the 1,380 foot line.
Gentlest: between the 1,120 foot line and the 1,100 foot line.
Gentlest: between the 1,380 foot line and the 1,380 foot line.
A line runs across Pixel Peak from end A to end B, 1,160 m long. It crosses 30 contour lines, thus the strip has 30 marks. Along the line, the land is highest at about 1,390 feet and lowest at about 1,090 feet. The strip shows the marks, and the graph shows a point for each mark and a smooth line through the points. The steepest stretch is between the 1,220 foot line and the 1,320 foot line. The gentlest stretch is between the 1,120 foot line and the 1,100 foot line. The height is stretched 5 times.
Which way is up?
- These are the lines of the hill of slides 3 and 8, with no numbers, no ticks and no stream.
- The same lines fit a hill and a depression.
- A printed elevation, the ticks of a depression or water shows which way is up.
Elevation from space
- A digital elevation model (DEM) is a grid of elevations, one value for each cell.
- SRTM measured most of the land with radar from the Space Shuttle in February 2000.
- A computer draws contour lines and shaded relief from a DEM.
Cell size: 30 m
Cells: 1,280
Selected cell: about 1,390 feet
SRTM made a DEM of most of the land with cells of about 30 m.
Drag the slider, or press an arrow key, to change the size of a cell. Home gives cells of 30 meters, and End gives cells of 240 meters. Smaller cells show more detail.
From the map to the side
- A computer can draw the land as a 3D model from a DEM. It draws the contour lines from the same grid.
- Each layer of this model is the land at or above one contour line. Start at the map, and tilt it from the top to the side: from above, the edge of each layer is a contour line of the map.
The contour map. Each line is the edge of one layer.
Read the land
- Tap the place on the map that the box names.
- Read the lines first: their shape, their spacing and their ticks.
Find the top.
Question 1
Two index contours next to each other are labeled 2,000 ft and 2,200 ft. There are four contour lines between them. What is the contour interval?
- Choice 1: 150 ft
- Choice 2: 220 ft
- Choice 3: 340 ft
- Choice 4: 4100 ft
Answer 1
Two index contours next to each other are labeled 2,000 ft and 2,200 ft. There are four contour lines between them. What is the contour interval?
- Choice 1: 150 ft
- Choice 2: 220 ft
- Choice 3: 340 ft ✓ Correct answer
- Choice 4: 4100 ft
Why: Four lines between make five spaces: 200 ft ÷ 5 = 40 ft. 50 ft divides by the count of lines, not by the count of spaces.
Question 2
The highest closed contour line on a hill is 860 m. The contour interval is 20 m, and the map gives no spot elevation. What can the elevation of the top be?
- Choice 1: 1More than 860 m and less than 880 m
- Choice 2: 2Exactly 860 m
- Choice 3: 3Less than 860 m
- Choice 4: 4More than 880 m
Answer 2
The highest closed contour line on a hill is 860 m. The contour interval is 20 m, and the map gives no spot elevation. What can the elevation of the top be?
- Choice 1: 1More than 860 m and less than 880 m ✓ Correct answer
- Choice 2: 2Exactly 860 m
- Choice 3: 3Less than 860 m
- Choice 4: 4More than 880 m
Why: The top is inside the 860 m line, so it is higher than 860 m. If it is 880 m or higher, the map shows a closed 880 m line too.
Question 3
Point A is at 1,150 m. Point B is at 950 m. The horizontal distance between them is 1,600 m. What is the slope between them?
- Choice 1: 10.8
- Choice 2: 20.125
- Choice 3: 38
- Choice 4: 40.2
Answer 3
Point A is at 1,150 m. Point B is at 950 m. The horizontal distance between them is 1,600 m. What is the slope between them?
- Choice 1: 10.8
- Choice 2: 20.125 ✓ Correct answer
- Choice 3: 38
- Choice 4: 40.2
Why: The rise is 1,150 − 950 = 200 m. The slope is 200 ÷ 1,600 = 0.125, or 1 in 8. 8 is the run divided by the rise, which is upside down.
Question 4
On a map at 1:24,000, two points are 3 cm apart. Their elevations differ by 72 m. What is the slope between them?
- Choice 1: 124
- Choice 2: 20.24
- Choice 3: 30.01
- Choice 4: 40.1
Answer 4
On a map at 1:24,000, two points are 3 cm apart. Their elevations differ by 72 m. What is the slope between them?
- Choice 1: 124
- Choice 2: 20.24
- Choice 3: 30.01
- Choice 4: 40.1 ✓ Correct answer
Why: First change the run to the ground: 3 cm × 24,000 = 72,000 cm, which is 720 m. Then 72 ÷ 720 = 0.1. 24 is 72 ÷ 3, with the run still in centimeters on the map.
Question 5
A closed contour line has short ticks on its inside edge. What does it show?
- Choice 1: 1A hilltop
- Choice 2: 2A depression: a low area with no outlet
- Choice 3: 3A lake
- Choice 4: 4A radio tower
Answer 5
A closed contour line has short ticks on its inside edge. What does it show?
- Choice 1: 1A hilltop
- Choice 2: 2A depression: a low area with no outlet ✓ Correct answer
- Choice 3: 3A lake
- Choice 4: 4A radio tower
Why: The ticks point down into the low area. Inside the line, the land is lower than the line, not higher as on a hill.
Question 6
A stream crosses three contour lines. The 600 ft line crosses it farthest east, the 560 ft line farthest west, and the 580 ft line between them. Which way does the stream flow?
- Choice 1: 1From east to west
- Choice 2: 2From west to east
- Choice 3: 3From north to south
- Choice 4: 4You cannot tell from contour lines.
Answer 6
A stream crosses three contour lines. The 600 ft line crosses it farthest east, the 560 ft line farthest west, and the 580 ft line between them. Which way does the stream flow?
- Choice 1: 1From east to west ✓ Correct answer
- Choice 2: 2From west to east
- Choice 3: 3From north to south
- Choice 4: 4You cannot tell from contour lines.
Why: Water flows downhill, from the 600 ft line toward the 560 ft line, so from east to west. The V's of the lines point east, upstream.
Practice
On the Kellogg West map, find the elevation of the top of Graham Mountain and of one point on the South Fork Coeur d'Alene River. Then calculate the slope between the two points.
Where to go next
- Add to your binder: the review page of unit 4, with each blank filled and checked.
- Next: unit 5, Latitude and longitude. Read its homework before that session.
- The study syllabus: the 12 units, in order.
- The mission map of Remote Sensing B: the decks of each unit, in order.
Review handout: Unit 4 review, Fill-in copy
Reference pages: Unit 4 reference, Index
Flash cards: Practice unit 4