Remote Sensing B, unit 2: Map basics
Goal: Read the marginal information of a map: its scale, its orientation, its legend and its date.
Parts of the rules: 3.b.i.(1)
Interpretation (3.b): 65-75% of the points
The plan: the homework, the examples, a quiz of six questions, and the practice.
From the homework
- Name each numbered part.
- What does a scale of 1:24,000 mean?
- What is the difference between an azimuth and a bearing?
If you did not read the homework, read the homework deck of unit 2 after the session.
Use a ratio scale
- Step 1: measure the distance on the map, in centimeters.
- Step 2: multiply by the number after "1:".
- Step 3: change the unit: 100 cm is 1 m, and 1,000 m is 1 km.
- Example: 3 cm at 1:24,000 is 72,000 cm, which is 720 m.
Step 1: 9.6 cm on the map.
Step 2: 9.6 cm × 24,000 = 230,400 cm.
Step 3: 230,400 cm is 2,304 m, or 2.304 km.
Drag a pin, or tap the map, to move the nearer pin. A pin snaps to the center of a place that is close. Press an arrow key to move the pin 50 m, or 500 m with Shift. Press Page Up to move the pin to the place before, and Page Down to move it to the next place.
A circle for the ground distance
Cover the part that you want.
ground (ground distance) = map × scale
map (map distance) = ground ÷ scale
scale (the number after "1:") = ground ÷ map
Use a scale bar
- Mark the two points on the edge of a strip of paper.
- Put the first mark on 0 of the scale bar, and read the distance at the second mark.
- A scale bar stays true when a map is printed larger or smaller, or shown on a screen, because the bar changes size with the map. A ratio does not.
Large scale and small scale
- A large scale, such as 1:24,000, shows a small area with much detail.
- A small scale, such as 1:1,000,000, shows a large area with less detail.
- The larger the number after "1:", the smaller the scale.
- 1 cm on the map is 240 m at 1:24,000, 1 km at 1:100,000, and 10 km at 1:1,000,000.
1:24,000
1 cm = 240 m
Larger scale: smaller area, more detail
Smaller scale: larger area, less detail
The ratio is for a printed map. On a screen, the scale bar stays true.
The number after 1: gets larger to the right. A larger number is a smaller scale: the map shows a larger area with less detail. The slider stops at 1:24,000, 1:100,000, 1:250,000 and 1:1,000,000. Drag the slider, or press an arrow key for a small step, or Page Up or Page Down for the next stop.
Measure an azimuth
- Put the center on the start point.
- Turn the protractor until 0° points north, along a grid line or the edge of the map.
- Read the degrees where the line to the target crosses the edge.
- Hold it still while you read.
Measure the azimuth from the school to the fire tower.
Correct. The true azimuth is 73°.
Your answer is the true azimuth.
Drag the middle of the protractor to move it, and drag its edge to turn it. Press an arrow key to move it 50 m. Press Shift with Left or Right to turn it 1°. Press Page Up to move its center to the place before, and Page Down to move it to the next place.
From azimuth to bearing
- From 0° to 90°: North (azimuth) East.
- From 90° to 180°: South (180° − azimuth) East.
- From 180° to 270°: South (azimuth − 180°) West.
- From 270° to 360°: North (360° − azimuth) West.
North is 0°, east is 90°, south is 180° and west is 270°. The degrees go clockwise. Drag the pointer, or press an arrow key to turn it 1°, or 10° with Shift.
NE: 40°
North (40°) East = North 40° East
The way back
- The way back is the opposite direction, 180° away. This is the back azimuth.
- If the azimuth is less than 180°, add 180°. If it is 180° or more, subtract 180°.
- For a bearing, change North to South, East to West, and the reverse. Keep the degrees.
The solid arrow is the way out. The dashed arrow is the way back, 180° away. North is 0°, and the degrees go clockwise. Drag the arrow of the way out, or press an arrow key to turn it 1°, or 10° with Shift.
Way out: 30°, North 30° East
Way back: 210°, South 30° West
30° is less than 180°, so add 180°: 210°
Change North to South and East to West. Keep 30°.
True north and magnetic north
- The diagram in the margin of a USGS map shows the angle between true north (the star) and magnetic north (MN).
- Magnetic north moves slowly, so the declination of an old map can be wrong today. The date of the map tells you how old the value is.
20° west
20° east
Move MN from 20° west to 20° east of true north. Drag the slider, or press an arrow key to move MN 1°, or Page Up or Page Down to move it 5°.
Guess the azimuth
- Guess the azimuth of each line, set your guess on the dial or type it, then press Show.
- Azimuths go clockwise from north, at 0°.
Drag the pointer of the dial, or press an arrow key to turn it 1°, or 10° with Shift. North is 0°.
Line 1 of 10
No guess yet
Line 1 of 10.
Question 1
On a map with a scale of 1:24,000, a straight road is 5 cm long. How long is the road on the ground?
- Choice 1: 1120 m
- Choice 2: 212 km
- Choice 3: 31.2 km
- Choice 4: 4240 m
Answer 1
On a map with a scale of 1:24,000, a straight road is 5 cm long. How long is the road on the ground?
- Choice 1: 1120 m
- Choice 2: 212 km
- Choice 3: 31.2 km ✓ Correct answer
- Choice 4: 4240 m
Why: 5 cm × 24,000 = 120,000 cm, which is 1,200 m, or 1.2 km. 120 m and 12 km come from a wrong count of the zeros. 240 m is the length of only 1 cm.
Question 2
Which map shows a small town in the most detail?
- Choice 1: 1A map at 1:24,000
- Choice 2: 2A map at 1:100,000
- Choice 3: 3A map at 1:250,000
- Choice 4: 4A map at 1:1,000,000
Answer 2
Which map shows a small town in the most detail?
- Choice 1: 1A map at 1:24,000 ✓ Correct answer
- Choice 2: 2A map at 1:100,000
- Choice 3: 3A map at 1:250,000
- Choice 4: 4A map at 1:1,000,000
Why: 1:24,000 is the largest of the four scales: 1 cm on the map is only 240 m on the ground, so each building is drawn bigger. At 1:1,000,000, 1 cm is 10 km, and a small town is a dot.
Question 3
A trail leaves the trailhead on an azimuth of 300°. What is the same direction as a bearing?
- Choice 1: 1South 60° West
- Choice 2: 2North 30° East
- Choice 3: 3South 30° East
- Choice 4: 4North 60° West
Answer 3
A trail leaves the trailhead on an azimuth of 300°. What is the same direction as a bearing?
- Choice 1: 1South 60° West
- Choice 2: 2North 30° East
- Choice 3: 3South 30° East
- Choice 4: 4North 60° West ✓ Correct answer
Why: 300° is between west (270°) and north (360°), so the bearing starts with North and ends with West. It is 360° − 300° = 60° from north.
Question 4
You hike from your camp to a lookout on an azimuth of 70°. On which azimuth do you walk back to camp?
- Choice 1: 1110°
- Choice 2: 2250°
- Choice 3: 3290°
- Choice 4: 470°
Answer 4
You hike from your camp to a lookout on an azimuth of 70°. On which azimuth do you walk back to camp?
- Choice 1: 1110°
- Choice 2: 2250° ✓ Correct answer
- Choice 3: 3290°
- Choice 4: 470°
Why: The way back is the opposite direction, 180° away: 70° + 180° = 250°. 110° is 180° − 70°, a common slip.
Question 5
In the margin of a USGS topographic map, a small diagram has a line with a star and a line marked MN. What does the angle between the two lines show?
- Choice 1: 1The magnetic declination: the angle between true north and magnetic north
- Choice 2: 2The slope of the land
- Choice 3: 3The scale of the map
- Choice 4: 4The latitude of the map
Answer 5
In the margin of a USGS topographic map, a small diagram has a line with a star and a line marked MN. What does the angle between the two lines show?
- Choice 1: 1The magnetic declination: the angle between true north and magnetic north ✓ Correct answer
- Choice 2: 2The slope of the land
- Choice 3: 3The scale of the map
- Choice 4: 4The latitude of the map
Why: The star points to true north, toward the North Pole. MN points to magnetic north, where a compass points. The angle changes with the place and slowly with time, so read the date of the map too.
Question 6
You compare two maps of one town. A new highway shows on only one of them. Which part of the margin tells you why?
- Choice 1: 1The legend
- Choice 2: 2The scale
- Choice 3: 3The date
- Choice 4: 4The north arrow
Answer 6
You compare two maps of one town. A new highway shows on only one of them. Which part of the margin tells you why?
- Choice 1: 1The legend
- Choice 2: 2The scale
- Choice 3: 3The date ✓ Correct answer
- Choice 4: 4The north arrow
Why: The date tells when each map was made. Roads, buildings and the edges of lakes change, so a newer map can show a road that an older map does not have.
Practice
Do the problems in Angles, Azimuths, and Bearings with your own protractor, and check your answers.
Where to go next
- Add to your binder: the review page of unit 2, with each blank filled and checked.
- Next: unit 3, Distance, perimeter and area. Read its homework before that session.
- The study syllabus: the 12 units, in order.
- The mission map of Remote Sensing B: the decks of each unit, in order.
Review handout: Unit 2 review, Fill-in copy
Reference pages: Unit 2 reference, Index
Flash cards: Practice unit 2