R2-1

Unit 2: Map basics

Unit 2 reference: Map basics

The reference pages of unit 2. Keep them behind the Reference tab at the end of your binder, after the index. To find a word, look in the index first.

Reading a map

What a map is

  • A map is a drawing of a part of the Earth's surface, much smaller than the real place.
  • A road map shows roads, for drivers.
  • A topographic map shows natural and human features and the height of the land. The USGS (U.S. Geological Survey) makes them for the whole United States.
  • A map on a phone can show traffic as it changes.
  • In this event, the same skills work on maps, satellite images and aerial photos.

The marginal information

The map of Mile's End with its margin. A label names each part of the margin: location, date, scale, orientation, legend and labels. The place is made up.LocationMile's EndDate2026Scale1:24,00001 kmOrientationNMNLegendWaterWoodsMain roadRoadBuildingFire towerBridgeTrailheadLabelsMile's End

The marginal information is the information at the edges, or margins, of a map. It has these parts:

  • Location: where the map is, as the name of a place or as latitude and longitude.
  • Date: when the map was made, or when the satellite took the image.
  • Scale: how much smaller the map is than the ground.
  • Orientation: which way is north.
  • Legend: each symbol and color, with its meaning.
  • Labels.

Read the margin before you read the map.

Find the scale on page R2-2. Find north and directions on page R2-3.

Location and date

  • The location tells where the map or image is. Give it as the name of a place, for example "Kellogg West, Idaho", or as latitude and longitude.
  • The date tells when the map was made, or when the satellite took the image.
  • Places change: new roads, new buildings, lakes that grow or shrink. Before you compare two maps or two images, read both dates.

The legend

The legend, or key, shows each symbol and color of the map with its meaning. The colors of a USGS topographic map:

ColorMeaning
BlueWater
GreenWoods and other plants
BrownContour lines
BlackMost roads, buildings and boundaries
RedMain roads and land survey lines
PurpleChanges from aerial photos, on older maps

R2-2

Unit 2: Map basics

Scale

What a scale tells

The scale tells how much smaller the map is than the ground.

At 1:24,000, 1 unit on the map is 24,000 of the same unit on the ground. So 1 cm is 24,000 cm, or 240 m, and 1 inch is 24,000 inches, or 2,000 feet.

A map gives its scale in three forms:

  • A ratio, such as 1:24,000.
  • Words, such as "1 inch equals 2,000 feet".
  • A scale bar.

Most USGS topographic maps of the event have a scale of 1:24,000.

Use a ratio scale

The formula of the ratio scale is: Ground distance = map distance × the number after "1:".

  • Step 1: measure the distance on the map, in centimeters.
  • Step 2: multiply by the number after "1:".
  • Step 3: change the unit. 100 cm is 1 m, and 1,000 m is 1 km.

Example: 7 cm at 1:24,000, in three steps.

  • Step 1: 7 cm
  • Step 2: 7 cm × 24,000 = 168,000 cm
  • Step 3: 168,000 cm is 1,680 m, or 1.68 km

Example: 7 cm at 1:100,000, in three steps.

  • Step 1: 7 cm
  • Step 2: 7 cm × 100,000 = 700,000 cm
  • Step 3: 700,000 cm is 7,000 m, or 7 km

The same 7 cm stands for a longer distance on the ground at the smaller scale, 1:100,000, than at 1:24,000.

Use a scale bar

A scale bar of 0 to 1 km under the ratio 1:24,000. A mark that starts at the 0 end of the bar shows that 1 cm on the map is 240 m on the ground.1:24,00001 km1 cm on the map= 240 m on the ground
  1. Mark the two points on the edge of a strip of paper.
  2. Put the first mark on 0 of the scale bar, and read the distance at the second mark.

A scale bar stays true when a map is printed larger or smaller, or shown on a screen, because the bar changes size with the map. A ratio does not.

Large scale and small scale

  • A large scale, such as 1:24,000, shows a small area with much detail.
  • A small scale, such as 1:1,000,000, shows a large area with less detail.
  • The larger the number after "1:", the smaller the scale.
Scale1 cm on the map is
1:24,000240 m
1:100,0001 km
1:1,000,00010 km

R2-3

Unit 2: Map basics

North and directions

Which way is north

  • Orientation is which way is north on a map. Most maps put north at the top, and a north arrow or a diagram in the margin shows it.
  • True north points to the North Pole. A compass points to magnetic north, a different place.
  • The angle between them is the magnetic declination. It changes from place to place, and slowly from year to year.
  • On a USGS map, the diagram in the margin shows true north with a star and magnetic north with "MN".
  • Magnetic north moves slowly, so the declination of an old map can be wrong today. The date of the map tells you how old the value is.

Azimuths

A circle has 360 degrees (360°). An azimuth gives a direction as one angle, measured clockwise from north.

DirectionAzimuth
North0°
East90°
South180°
West270°

An azimuth goes from 0° up to, but not including, 360°. 360° is the same as 0°.

Measure an azimuth with a circular protractor whose degrees go clockwise:

  1. Put the center on the start point.
  2. Turn the protractor until 0° points north, along a grid line or the edge of the map.
  3. Read the degrees where the line to the target crosses the edge.
  4. Hold it still while you read.

Bearings

A bearing is an older way to give the same direction. It starts with North or South, then gives the degrees toward East or West, from 0° to 90°.

AzimuthBearingExample
From 0° to 90°North (azimuth) EastNorth (25°) East = North 25° East
From 90° to 180°South (180° − azimuth) EastSouth (180° − 160°) East = South 20° East
From 180° to 270°South (azimuth − 180°) WestSouth (255° − 180°) West = South 75° West
From 270° to 360°North (360° − azimuth) WestNorth (360° − 310°) West = North 50° West

Example: the azimuth 160°.

  1. 160° is between 90° and 180°, so the bearing starts with South and ends with East.
  2. The angle is 180° − 160° = 20°.
  3. The bearing is South 20° East.

The way back

The way back is the opposite direction, 180° away. This is the back azimuth.

If the azimuth is less than 180°, add 180°. If it is 180° or more, subtract 180°.

Examples:

  • 115° is less than 180°, so add 180°: 295°
  • 260° is 180° or more, so subtract 180°: 80°

For a bearing, change North to South, East to West, and the reverse. Keep the degrees.

Example: the way there is North 25° East, and the way back is South 25° West.

main fb25b7f