Remote Sensing B, unit 3: Distance, perimeter and area
Goal: Measure the distance between two features on a map, and calculate a perimeter and an area.
Parts of the rules: 3.b.i.(3)
Interpretation (3.b): 65-75% of the points
The plan: the homework, the examples, a quiz of six questions, and the practice.
From the homework
- Why is a road longer than the straight line between its ends?
- Why does the scale go into an area two times?
- How do you find the area of a lake with a grid?
If you did not read the homework, read the homework deck of unit 3 after the session.
Measure with a ruler
- Measure from the center of one symbol to the center of the other, to the nearest millimeter.
- Example: 6.5 cm at 1:24,000 is 156,000 cm, which is 1,560 m, or 1.56 km.
Step 1: 3.1 cm on the map.
Drag a pin, or tap the map, to move the nearer pin. A pin snaps to the center of a place that is close. Press an arrow key to move the pin 50 m, or 500 m with Shift. Press Page Up to move the pin to the place before, and Page Down to move it to the next place.
Measure with a scale bar
- Mark the two places on the edge of a strip of paper.
- Put the first mark on 0, and read the second mark on the bar.
- If the distance is longer than the bar, read one full bar, move the strip, and add.
0 full bars and about 820 m: about 820 m
The first mark is on 0. The second mark is past the end of the bar.
Drag a pin, or tap the map, to move the nearer pin. A pin snaps to the center of a place that is close. Press an arrow key to move the pin a little. A pin that comes close to a place snaps to it. Then press Mark, To the bar and Move one bar to read the distance with the strip.
Feet and miles
- On a USGS map at 1:24,000, 1 inch on the map is 2,000 feet on the ground.
- 1 mile is 5,280 feet.
- Example: 3 inches is 6,000 feet, which is about 1.14 miles.
3 inches × 24,000 = 72,000 inches
× 24,000: multiply by 24, then the decimal point moves 3 places to the right.
72,000 inches ÷ 12 = 6,000 feet
÷ 12: 12 inches make 1 foot. 12 is not 10, 100 or 1,000, so divide.
6,000 feet ÷ 5,280 = about 1.14 miles
÷ 5,280: 5,280 feet make 1 mile. Divide, then round to 2 decimals.
The bar shows the distance on the map at its length on a ruler. The three rungs change it to the distance on the ground, one step at a time.
Perimeter of a field
- On a map at 1:24,000, the five sides of the field are 3, 0.5, 2.5, 1.5 and 2.5 cm long.
- Change each side to the ground: 720, 120, 600, 360 and 600 m.
- Add the sides: 720 + 120 + 600 + 360 + 600 = 2,400 m, or 2.4 km.
Add on the map, then use the scale once 3 + 0.5 + 2.5 + 1.5 + 2.5 = 10 cm on the map. 10 cm × 24,000 = 240,000 cm = 2,400 m.
Use the scale on each side, then add 720 + 120 + 600 + 360 + 600 = 2,400 m.
Press Walk to add the sides one at a time.
A field with 5 straight sides on a map at 1:24,000, on a grid of squares of 0.5 cm. In order around the field, the sides are 3 cm (720 m), 0.5 cm (120 m), 2.5 cm (600 m), 1.5 cm (360 m) and 2.5 cm (600 m) on the map. The perimeter is 10 cm on the map and 2,400 m on the ground.
Area: use the scale on each side
- A park is 2 cm by 3 cm on a map at 1:24,000.
- On the ground: 480 m by 720 m.
- Area: 480 m × 720 m = 345,600 m², which is about 34.6 hectares.
2 cm × 24,000 = 480 m. 3 cm × 24,000 = 720 m.
480 m × 720 m = 345,600 m², about 34.6 ha.
✗ Scale used once: 6 cm² × 24,000 = 144,000 cm² = 14.4 m². That is 24,000 times too small.
5.5 cm × 50,000 = 2,750 m. 5.5 cm × 50,000 = 2,750 m.
2,750 m × 2,750 m = 7,562,500 m², about 756 ha.
✗ Scale used once: 30.25 cm² × 50,000 = 1,512,500 cm² = 151.25 m². That is 50,000 times too small.
Length on the map
Width on the map
Two sliders set the length and the width of the rectangle on the map, from 0.5 cm to 6 cm in steps of 0.5 cm. Press the Left or Right arrow key to move a slider one step. The scale buttons set the scale of the map. Press the Up or Down arrow key on them to pick the next scale. The readout changes each side to the ground first, and then multiplies the two sides.
A circle for the area of a rectangle
Cover the part that you want.
area (area of the rectangle) = length × width
length (long side) = area ÷ width
width (short side) = area ÷ length
Area of a lake
- Each 1 cm square of the grid at 1:24,000 is 57,600 m², or 5.76 hectares, on the ground.
- The lake fills 11 squares and covers 20 more in part.
- Count the full squares and half the part squares: 11 + 20 ÷ 2 = 21 squares. 21 × 5.76 hectares = 120.96 hectares, about 121 hectares.
The lake of Mile's End on a grid of squares of 240 m. 11 squares are full, and they are filled. 20 squares are part, and each has a border. The edge of the lake goes over the part squares.
11 full + 20 part ÷ 2 = 21 squares. 21 × 5.76 ha = 120.96 ha.
The outline of the lake: about 107.9 ha.
A circle for the area from a count
Cover the part that you want.
area (area of the shape) = count × each
count (number of squares or pixels) = area ÷ each
each (area of one square or pixel) = area ÷ count
Area from pixels
- One pixel of Sentinel-2 is 10 m by 10 m: 100 m².
- One pixel of Landsat is 30 m by 30 m: 900 m².
- Nine Sentinel-2 pixels fit in one Landsat pixel.
- One pixel of MODIS at 250 m is 62,500 m², more than six hectares.
68 pixels × 100 m² = 6,800 m²
The field: 94 m × 66 m = 6,204 m².
A MODIS pixel of 250 m is 62,500 m². That is more than the whole farm (43,200 m²).
An image of a made-up farm, 240 m by 180 m, with pixels of 10 m. A border marks the 68 pixels that are more than half field. A dashed line shows the true edge of the field.
Question 1
On a map with a scale of 1:24,000, two towers are 7.5 cm apart. How far apart are they on the ground?
- Choice 1: 118 km
- Choice 2: 21.8 km
- Choice 3: 3180 m
- Choice 4: 43.2 km
Answer 1
On a map with a scale of 1:24,000, two towers are 7.5 cm apart. How far apart are they on the ground?
- Choice 1: 118 km
- Choice 2: 21.8 km ✓ Correct answer
- Choice 3: 3180 m
- Choice 4: 43.2 km
Why: 7.5 cm × 24,000 = 180,000 cm, which is 1,800 m, or 1.8 km. 18 km and 180 m come from a wrong count of the zeros.
Question 2
On a USGS map with a scale of 1:24,000, a trail is 2.5 inches long. How long is the trail on the ground?
- Choice 1: 15,000 feet
- Choice 2: 22,500 feet
- Choice 3: 360,000 feet
- Choice 4: 41,000 feet
Answer 2
On a USGS map with a scale of 1:24,000, a trail is 2.5 inches long. How long is the trail on the ground?
- Choice 1: 15,000 feet ✓ Correct answer
- Choice 2: 22,500 feet
- Choice 3: 360,000 feet
- Choice 4: 41,000 feet
Why: At 1:24,000, 1 inch is 2,000 feet, so 2.5 inches is 5,000 feet, a little less than 1 mile. 60,000 is 2.5 × 24,000: that is a count of inches, not feet.
Question 3
A square park is 2 cm by 2 cm on a map with a scale of 1:10,000. What is its area on the ground?
- Choice 1: 120,000 m²
- Choice 2: 2400 m²
- Choice 3: 3400,000 m²
- Choice 4: 440,000 m²
Answer 3
A square park is 2 cm by 2 cm on a map with a scale of 1:10,000. What is its area on the ground?
- Choice 1: 120,000 m²
- Choice 2: 2400 m²
- Choice 3: 3400,000 m²
- Choice 4: 440,000 m² ✓ Correct answer
Why: Change each side first: 2 cm × 10,000 = 20,000 cm, which is 200 m. Then 200 m × 200 m = 40,000 m², or 4 hectares. 20,000 is the length of one side in centimeters, not an area.
Question 4
A field has four sides. On a map at 1:24,000, the sides are 2 cm, 3 cm, 2 cm and 4 cm long. What is the perimeter of the field on the ground?
- Choice 1: 111 km
- Choice 2: 2264 m
- Choice 3: 32.64 km
- Choice 4: 426.4 km
Answer 4
A field has four sides. On a map at 1:24,000, the sides are 2 cm, 3 cm, 2 cm and 4 cm long. What is the perimeter of the field on the ground?
- Choice 1: 111 km
- Choice 2: 2264 m
- Choice 3: 32.64 km ✓ Correct answer
- Choice 4: 426.4 km
Why: The sides add to 11 cm on the map. 11 cm × 24,000 = 264,000 cm, which is 2,640 m, or 2.64 km.
Question 5
A Landsat image shows a farm as 40 pixels. Each pixel is 30 m by 30 m. What is the area of the farm?
- Choice 1: 13.6 hectares
- Choice 2: 236 hectares
- Choice 3: 30.36 hectares
- Choice 4: 40.12 hectares
Answer 5
A Landsat image shows a farm as 40 pixels. Each pixel is 30 m by 30 m. What is the area of the farm?
- Choice 1: 13.6 hectares ✓ Correct answer
- Choice 2: 236 hectares
- Choice 3: 30.36 hectares
- Choice 4: 40.12 hectares
Why: 40 × 900 m² = 36,000 m². A hectare is 10,000 m², so that is 3.6 hectares. 0.12 hectares comes from 40 × 30 m², which uses only one side of a pixel.
Question 6
You lay a grid on a lake. Each square is 1 hectare on the ground. The lake fills 14 squares, and it covers 10 more squares in part. What is the best estimate of its area?
- Choice 1: 114 hectares
- Choice 2: 224 hectares
- Choice 3: 310 hectares
- Choice 4: 419 hectares
Answer 6
You lay a grid on a lake. Each square is 1 hectare on the ground. The lake fills 14 squares, and it covers 10 more squares in part. What is the best estimate of its area?
- Choice 1: 114 hectares
- Choice 2: 224 hectares
- Choice 3: 310 hectares
- Choice 4: 419 hectares ✓ Correct answer
Why: Count each full square, and half of each part square: 14 + 10 ÷ 2 = 19 hectares. 14 leaves out the part squares, and 24 counts each part square as full.
Practice
Do the problems in Measuring Distances on Maps with a metric ruler, and check your answers.
Where to go next
- Add to your binder: the review page of unit 3, with each blank filled and checked.
- Next: unit 4, Elevation, contours and slope. Read its homework before that session.
- The study syllabus: the 12 units, in order.
- The mission map of Remote Sensing B: the decks of each unit, in order.
Review handout: Unit 3 review, Fill-in copy
Reference pages: Unit 3 reference, Index
Flash cards: Practice unit 3