The reference pages of unit 3. Keep them behind the Reference tab at the end of your binder, after the index. To find a word, look in the index first.
Distance
From the map to the ground
The ground distance is the distance between two places on the ground. The scale of the map gives it. Page R2-2 gives the three forms of a scale.
Step 1: measure the distance on the map with a ruler, from the center of one symbol to the center of the other, to the nearest millimeter.
Step 2: multiply by the number after "1:".
Step 3: change the unit. 100 cm is 1 m, and 1,000 m is 1 km.
Example: 5.3 cm at 1:24,000, in three steps.
Step 1: 5.3 cm
Step 2: 5.3 cm × 24,000 = 127,200 cm
Step 3: 127,200 cm is 1,272 m, or 1.272 km
Write each step, so that you count the zeros correctly.
Measure with a scale bar
A scale bar shows ground distances on the map. To measure with it, use a strip of paper:
Mark the two places on the edge of the strip.
Put the first mark on 0 of the bar, and read the second mark on the bar.
If the distance is longer than the bar, read one full bar, move the strip, and add.
A scale bar stays true when the map is printed larger or smaller. Page R2-2 tells why.
Feet and miles
On a USGS map at 1:24,000, 1 inch on the map is 24,000 inches on the ground, or 2,000 feet.
Unit
Is the same as
1 m
100 cm
1 km
1,000 m
1 foot
12 inches
1 mile
5,280 feet
Example: 5.4 inches at 1:24,000, in three steps.
Step 1: 5.4 in
Step 2: 5.4 in × 24,000 = 129,600 in
Step 3: 129,600 in is 10,800 ft, or about 2.05 miles
The short way: 5.4 × 2,000 feet = 10,800 feet.
A straight line or a path
The straight-line distance is the shortest distance between two places.
A road or a river bends, so the distance along it is longer than the straight line.
To measure a path, measure it in short straight pieces and add them. Or lay a string along the path, then measure the string.
Then change the length on the map to a ground distance, as in the steps on this page.
R3-2
Unit 3: Distance, perimeter and area
Perimeter and area
Perimeter
The perimeter is the distance around a shape. Add the lengths of all its sides. A perimeter is a length, so its unit is m or km, not m².
Two ways give the same answer. Example: a field is a rectangle of 4.2 cm by 2.8 cm on a map at 1:24,000.
Add on the map, then use the scale once: 4.2 + 2.8 + 4.2 + 2.8 = 14 cm on the map. 14 cm × 24,000 = 336,000 cm = 3,360 m.
Use the scale on each side, then add: 1,008 + 672 + 1,008 + 672 = 3,360 m.
Area
The area of a rectangle is its length times its width. An area is in square units, such as m².
The formula of the area on a map: Change each side to a ground distance first. Area = ground length × ground width.
The scale goes into an area two times, once for each side. The figure shows a square of 1 cm by 1 cm on a map at 1:24,000.
Example: the same field, 4.2 cm by 2.8 cm at 1:24,000.
Step 1: 4.2 cm × 24,000 = 1,008 m
Step 2: 2.8 cm × 24,000 = 672 m
Step 3: 1,008 m × 672 m = 677,376 m², or about 67.7 ha
The wrong way uses the scale one time only: 11.76 cm² × 24,000 = 282,240 cm² = 28.224 m². That is 24,000 times too small.
Page R3-3 changes m² to hectares.
Area of a lake
A lake has curved edges, so it is not a rectangle. Lay a grid of squares on it:
Count the squares that are fully in the lake.
Count the squares that are partly in it, and take half of that count.
Add the two counts, and multiply by the area of one square.
Example: a grid of 0.9 cm squares on a map at 1:24,000. One square is 216 m by 216 m on the ground: 46,656 m², or 4.6656 ha. A lake fills 23 squares and covers 28 more in part.
Squares: 23 + 28 ÷ 2 = 37
Area: 37 × 46,656 m² = 1,726,272 m², or about 173 ha
R3-3
Unit 3: Distance, perimeter and area
Units of area and pixels
Units of area
An area is in square units. A square meter (m²) is the area of a square of 1 m by 1 m. A hectare (ha) is the area of a square of 100 m by 100 m.
Unit
A square of
Area
square meter (m²)
1 m by 1 m
1 m²
hectare (ha)
100 m by 100 m
10,000 m²
square kilometer (km²)
1,000 m by 1,000 m
1,000,000 m², or 100 ha
Example: a farm is 385,000 m².
In hectares, divide by 10,000: 385,000 m² ÷ 10,000 = 38.5 ha
In square kilometers, divide by 1,000,000: 385,000 m² ÷ 1,000,000 = 0.385 km²
1 m is 100 cm, so 1 m² is 100 cm × 100 cm = 10,000 cm². To change cm² to m², divide by 10,000, not by 100.
Area from pixels
A satellite image is a grid of squares already. Each square is a pixel.
The formula of the area from pixels: Area = the number of pixels × the area of one pixel.
Satellite
One pixel
Area of one pixel
In hectares
Sentinel-2
10 m by 10 m
100 m²
0.01 ha
Landsat
30 m by 30 m
900 m²
0.09 ha
MODIS at 250 m
250 m by 250 m
62,500 m²
6.25 ha
Example: a lake covers 75 pixels of a Landsat image.
One pixel: 30 m × 30 m = 900 m²
The lake: 75 × 900 m² = 67,500 m², or 6.75 ha
Use both sides of a pixel. The number of pixels × 30 m is a length, not an area.