Unit 3 review: Distance, perimeter and area

What we learned in unit 3, and the traps that cost points. Keep this page in your binder, behind the tab of unit 3.

What we learned

  1. The ground distance is the map distance times the number after "1:". Then change the unit: 100 cm is 1 m, and 1,000 m is 1 km.
  2. Measure with a ruler from the center of one symbol to the center of the other, to the nearest millimeter. On a screen, or for a long distance, use the scale bar and a strip of paper.
  3. On a USGS map at 1:24,000, 1 inch is 2,000 feet. 1 mile is 5,280 feet.
  4. The straight-line distance is the shortest distance between two places. A road or a river bends, so the distance along it is longer.
  5. The perimeter is the distance around a shape: add all its sides. Its unit is m, not m².
  6. The area of a rectangle is length × width. Change each side to the ground, then multiply.
  7. 1 hectare (ha) is 100 m by 100 m: 10,000 m². 1 km² is 1,000,000 m², or 100 ha.
  8. For a shape with curved edges, count the full squares of a grid, add half of the part squares, and multiply by the area of one square. An image is a grid already: one Landsat pixel is 30 m by 30 m, 900 m².

Traps

  1. The scale goes in two times.

    Do not: multiply 3 cm × 4 cm and use 1:10,000 one time: that gives only 12 m².

    Do: change each side to the ground first: 300 m × 400 m = 120,000 m², or 12 ha.

    Drill it: Scale it twice

  2. 1 m² is 10,000 cm², not 100.

    Do not: divide 82,000 cm² by 100 because 100 cm is 1 m: 820 m².

    Do: square the factor: 1 m² is 100 cm × 100 cm, thus 82,000 cm² is 8.2 m².

    Drill it: Hectare grid

  3. Hectares and square kilometers.

    Do not: write 250,000 m² as 2.5 ha or as 25 km².

    Do: divide by the m² in 1 ha: 25 ha. Divide by the m² in 1 km²: 0.25 km².

    Drill it: Hectare grid

  4. Count the zeros.

    Do not: write 192 m or 19.2 km for 8 cm at 1:24,000.

    Do: write each step: 8 cm × 24,000 = 192,000 cm, which is 1,920 m, or 1.92 km.

    Drill it: Zero ladder

  5. Inches are not feet.

    Do not: multiply 3.5 inches by 24,000 and write 84,000 feet.

    Do: read 84,000 as a count of inches, and divide by 12: 7,000 feet, about 1.33 miles.

    Drill it: Zero ladder

  6. A pixel has two sides.

    Do not: multiply 25 Landsat pixels by 30 and write 750 m².

    Do: use both sides of each pixel: 25 × 30 m × 30 m = 22,500 m², or 2.25 ha.

    Drill it: Pixel counter

  7. Half of each part square.

    Do not: give 12 ha or 20 ha for a lake that fills 12 squares of 1 ha and covers 8 more in part.

    Do: count half of each part square: 12 + 8 ÷ 2 = 16 ha.

    Drill it: Grid counter

  8. A road is longer than the line.

    Do not: measure a winding road from one end directly to the other.

    Do: measure it in short straight pieces and add them, or lay a string along it.

    Drill it: Winding road

Practice this unit with its flash cards: open remotesensing.fyi, and find unit 3.

main fb25b7f