Between the lines

Drag a pin on the map of Pixel Peak, and see what the contour lines tell about the elevation there: a range, or the exact value at a printed mark.

Unit 4: Elevation, contours and slope

How to use it

Drag the pin, or tap the map, to move it, and read what the map tells about the elevation at the pin. Put the pin on the spot elevation on the top or on the benchmark, BM, to read an exact value. Press Compare with the ground to see the elevation of the ground at the pin, inside the range of the map. On a keyboard, press Tab to reach the pin, then an arrow key to move it 10 m, or 100 m with Shift.

Pixel Peak is a made-up hill. Contour lines from 1,100 to 1,380 feet, every 20 feet. The labeled lines are every 100 feet. The blue line is a stream. The closed line with short ticks is a depression. The spot elevation on the top is 1,392 feet. The benchmark, BM, is at 1,091 feet.1,1001,2001,3001,392BM 1,091

Higher than 1,100 feet and lower than 1,120 feet. About 1,110 feet.

A map of Pixel Peak from above, with a contour line every 20 feet. Drag the pin, or tap the map, to move it. The pin snaps to the spot elevation on the top and to the benchmark, BM, when it is close. Press an arrow key to move the pin 10 m, or 100 m with Shift.

In the decks

All tools

main fb25b7f