Remote Sensing B, unit 7 homework: Sensors and instruments
Read this deck before the session of unit 7. It takes about 15 minutes.
Goal: Tell a passive sensor from an active sensor, and name the instrument that makes each kind of data.
At the end, three questions check what you learned. Answer each one before you go to the next slide.
Five passive ranges
A passive sensor measures energy that it does not send: sunlight that the ground reflects, or heat that the ground gives off.
| Range | What it shows |
|---|---|
| Ultraviolet | Haze, smoke and other particles in the air |
| Visible | What our eyes see. Natural color images |
| Near infrared | Plants are bright, and water is dark |
| Shortwave infrared | Water in plants and soil, burned land, and snow told apart from clouds |
| Thermal infrared | The temperature of the surface, by day and by night |
Radar backscatter
- A radar is an active sensor: it sends its own microwave pulses, and measures the part that comes back, the backscatter.
- A rough surface, such as a forest or a field, sends some back: it is gray.
- A smooth surface, such as calm water or a runway, reflects the pulse away: it is dark.
- Walls and the ground make corners that send much back, so a city is bright.
SAR and InSAR
- A SAR (synthetic aperture radar) uses the motion of the satellite to act like a very long antenna, so its images are sharp. Sentinel-1 carries a SAR.
- InSAR (interferometric SAR) compares two SAR images of one place from two dates. The difference shows if the ground moved, even by a few centimeters: after an earthquake, over a volcano, or where the ground sinks.
Radar altimeters and elevation
- A radar altimeter sends a pulse straight down and times its echo.
- The range, the distance to the surface, is R = c × t ÷ 2. c is the speed of light, and t is the time from the pulse to its echo. The pulse goes down and back up, so divide by 2.
- An echo after 2 ms: t = 0.002 s, so R = 3.0 × 10⁸ × 0.002 ÷ 2 = 300,000 m = 300 km.
- The trap: without the ÷ 2 you get 600 km. That is the whole trip, down and back up, not the distance to the surface.
- A DEM (digital elevation model) is a grid of elevations. SRTM made one of most of the land with radar from the Space Shuttle.
Two ways to scan
- A whiskbroom scanner has one mirror that sweeps from side to side, across the path of the satellite, and builds each line point by point. Landsat 5 TM and Landsat 7 ETM+ are whiskbrooms.
- A pushbroom scanner has a long row of detectors, one for each point of a line, and has no moving mirror. Landsat 8 and 9 OLI and Sentinel-2 are pushbrooms.
The names of the instruments
| Instrument | What it does, and examples |
|---|---|
| Multispectral imager | Measures several bands at once. Landsat OLI, the imager of Sentinel-2, ASTER |
| Radiometer | Measures the amount of energy with care. MODIS is a spectroradiometer |
| Thermal infrared imager | Measures the temperature of the surface. Landsat TIRS, ECOSTRESS |
| SAR instrument | The radar of Sentinel-1 |
| Radar altimeter | The height of the sea and of ice |
| Digital elevation model | The product of SRTM |
Question 1
Which of these sensors is active?
- Choice 1: 1A thermal infrared imager
- Choice 2: 2A camera that records visible light
- Choice 3: 3A radar altimeter
- Choice 4: 4A near infrared sensor
Answer 1
Which of these sensors is active?
- Choice 1: 1A thermal infrared imager
- Choice 2: 2A camera that records visible light
- Choice 3: 3A radar altimeter ✓ Correct answer
- Choice 4: 4A near infrared sensor
Why: An active sensor sends its own signal and measures what comes back. A radar altimeter sends a pulse. The other three measure light from the Sun or heat from the ground, so they are passive.
Question 2
In a radar image, a calm lake is dark. Why?
- Choice 1: 1The smooth water reflects the pulse away from the satellite.
- Choice 2: 2The water absorbs the pulse, so none of it comes back.
- Choice 3: 3The cold water gives off less heat than the land.
- Choice 4: 4The clouds over the lake block the pulse from the satellite.
Answer 2
In a radar image, a calm lake is dark. Why?
- Choice 1: 1The smooth water reflects the pulse away from the satellite. ✓ Correct answer
- Choice 2: 2The water absorbs the pulse, so none of it comes back.
- Choice 3: 3The cold water gives off less heat than the land.
- Choice 4: 4The clouds over the lake block the pulse from the satellite.
Why: A smooth surface acts like a mirror, so the pulse goes away and little comes back. Wind makes waves on the water, and then more comes back. A radar sends its own pulse, so heat does not matter, and microwaves go through clouds.
Question 3
Which instrument has a long row of detectors that sees a whole line across the path of the satellite at once?
- Choice 1: 1A whiskbroom scanner
- Choice 2: 2A pushbroom scanner
- Choice 3: 3A radar altimeter
- Choice 4: 4A synthetic aperture radar
Answer 3
Which instrument has a long row of detectors that sees a whole line across the path of the satellite at once?
- Choice 1: 1A whiskbroom scanner
- Choice 2: 2A pushbroom scanner ✓ Correct answer
- Choice 3: 3A radar altimeter
- Choice 4: 4A synthetic aperture radar
Why: A pushbroom has one detector for each point of the line, so it needs no moving mirror. A whiskbroom sweeps one mirror from side to side and sees one point at a time.
Before the session
- Bring a calculator and your binder.
- The new words of unit 7: passive, active, backscatter, SAR, InSAR, radar altimeter, range, DEM, whiskbroom, pushbroom, multispectral imager, radiometer, thermal infrared imager. The index of your binder gives the meaning of each one.
- To read more: Fundamentals of Remote Sensing.